Showing all 3 results

  • Coolants and Chemicals

    <strong>Coolant Filtration</strong> Water filtration is proven to reduce wear and to maintain effective heat transfer. This is especially important for coolants that stay in the engine longer. Additionally, water filters can provide a convenient and reliable method for delivering supplemental coolant extenders into the cooling system to improve performance and extend coolant service life. <ul> <li>Extended Service Water Filters</li> <li>Standard Service Water Filters</li> <li>Non-Chemical Water Filters</li> </ul> <figure class="wp-block-image"><img class="wp-image-1131" src="" sizes="(max-width: 699px) 100vw, 699px" srcset=" 699w, 300w" alt="" /></figure> <strong> Unmatched Protection </strong> In addition to providing superior freeze and boil over protection, Fleetguard products protect your engine from the most damaging cooling system problems, including: <ul> <li> Corrosion</li> </ul> <figure class="wp-block-image"><img class="wp-image-1132" src="" sizes="(max-width: 1024px) 100vw, 1024px" srcset=" 1024w, 300w, 768w, 1090w" alt="" /></figure> <ul> <li> Liner Pitting/Cavitation</li> </ul> <figure class="wp-block-image"><img class="wp-image-1133" src="" sizes="(max-width: 1024px) 100vw, 1024px" srcset=" 1024w, 300w, 768w, 1090w" alt="" /></figure> <ul> <li>Scale & Deposits</li> </ul> <figure class="wp-block-image"><img class="wp-image-1134" src="" sizes="(max-width: 1024px) 100vw, 1024px" srcset=" 1024w, 300w, 768w, 1092w" alt="" /></figure> <ul> <li>Acidification</li> </ul> Coolants acidify due to the degradation of antifreeze and combustion gases entering the cooling system, which can damage cooling system components. Fleetguard Fully Formulated Coolants buffer the coolant to prevent and neutralize the formation of acids.

    80% of hydraulic system component failures are caused by excess contamination in the hydraulic system. Hydraulic or fluid power systems can be found on a variety of equipment. Systems range from the relatively simple power steering and transmission of trucks and buses, to the more complex systems found in agricultural, construction, marine and mining applications. These systems contain precision-machined components that are very sensitive to wear from abrasive particles and need to be protected. Contaminants can enter hydraulic systems from a number of sources: Built-in from the manufacture of the system and its components Quality and cleanliness of the hydraulic fluid used and the filling process Operational ingress where rams and cylinders are exposed to dusty atmospheres and missing ineffective tank breathers System generated wear particles Eliminating contaminants from the onset is preferable through effective maintenance processes, however Cummins Filtration offers a comprehensive range of replacement suction, return, pressure and offline hydraulic filters to cover a variety of applications. We also produce four families of general purpose mix and match spin-on filter heads and filters covering different flow and pressure requirements in a range of filtration efficiencies. Our filters meet or exceed the original equipment manufacturers’ specifications and are supported by our unmatched global warranty for your peace of mind

    Fleetguard transmission filters are designed and tested in real world operating environments to perform with maximum reliability and provide these comparative benefits: <ul> <li>Higher filtration efficiency</li> <li>Exceptional flow without filter plugging</li> <li>Superior structural integrity under fluid system pressure</li> <li>Longer filter life</li> <li>Guaranteed performance which meets or exceeds OEM specifications</li> </ul> Because transmission fluid cools, lubricates and transmits hydraulic power, it is critical to maintain adequate fluid levels in your system at all times. When the fluid level is too low, the converter, bushings, bearings and clutches do not receive an adequate supply of fluid. If fluid levels are too high, they can aerate and cause your transmission to shift erratically or overheat. For maximum performance and protection, transmission fluid and filters should be changed according to engine manufacturer recommendations. Harsh environments, severe operation or extreme duty cycles may require more frequent change intervals. Transmission system protection is optimized with the Fleetguard Monitor™ oil, transmission and hydraulic fluid analysis testing kits, which provide results within 24 hours and allow transmission system troubleshooting before problems arise. Periodic inspections of drive shaft components, electrical charging system, transmission oil coolers and engine cooling systems should also be performed to identify potential problems and protect against transmission malfunction. With the broadest range of OE replacement parts for Allison®, GM®, Ford®, Chrysler®, Magnefine®, Mitsubishi®, Nissan®, and Toyota® transmissions, Fleetguard transmission filtration technology leads the market with expert engineering, real world performance, and the most dependable service in the industry.